Anti-Static ESD Epoxy Flooring in Katy

Static electricity is invisible until it isn't. A single electrostatic discharge can destroy a circuit board, corrupt sensitive equipment, or ignite vapors in the wrong environment. ESD-control epoxy flooring gives that charge a safe, controlled path to ground, protecting both your product and your people.

Katy Floors Epoxy installs anti-static and ESD-control floor systems for electronics manufacturers, server and data spaces, labs, cleanrooms, and facilities handling flammable materials across Katy and Greater Houston. These are engineered systems, specified to a measurable performance standard rather than just installed and hoped over.

Static-Dissipative vs. Conductive Floors

ESD flooring comes in two main classes, and choosing correctly depends on your application. Static-dissipative systems control charge at a moderate, safe rate and typically measure electrical resistance in the range of one million to one billion ohms, ideal for most electronics assembly and handling areas. Conductive systems move charge more quickly, with lower resistance, and are used where the fastest, most controlled dissipation is required, such as around munitions, solvents, or highly sensitive components. We help you match the system to your industry's requirements.

How an ESD Floor Works

An ESD epoxy system embeds a conductive network, often a grounded copper grid tied into the coating, along with conductive media in the epoxy itself. As a charge builds on a person or cart, the floor channels it through this network to ground instead of letting it accumulate and discharge into your equipment. The result is a continuous, monitored ground plane across the entire room.

Durable and Cleanable, Too

An ESD floor still has to do everything a good industrial floor does. Our systems are seamless and non-porous, so they resist chemicals, sweep and mop clean, and hold up to cart and foot traffic. That makes them well suited to cleanroom-adjacent and lab environments where contamination control matters as much as static control.

Prep Is Critical for Conductivity

An ESD system only works if it bonds correctly and its conductive layer stays continuous. We diamond grind every slab to a clean, sound, properly profiled surface, address moisture with testing and mitigation primers where needed, and install the grounding network precisely. Poor prep doesn't just risk delamination here; it can compromise the electrical performance the whole system exists to provide.

Engineered for Your Facility

Whether you're protecting a few sensitive workstations or grounding an entire production floor, we'll specify, install, and verify an ESD system that meets your requirements and stands up to daily use in the Houston climate.